|
|
|
|
| |
| Welded wire mesh machine |
| |
| Characteristic: It has the board machine frame,electromagnetism stepless time, the distance of wire is wide, small noise, stabilization and save electricity, the mesh is standard. The machine can be used to produce f0.45-f1.0mm low carbon steel wire, stainless steel wire mesh and other kinds of welded wire mesh. wire comb binding machine, wire crimping machine, wire processing machine |
| |
| AH-L-W4 |
| Characteristic: stability, lowness noise, draw straight and send wire automatically. It can weld the1/2ˊ-4ˊwire mesh. |
| |
| AH-L-W6 |
| Characteristic: high stability, lowness noise, draw straight and send wire automatically. It can weld the wire mesh which has thick diameter |
| |
| AH-J-W6 |
| Characteristic: It can give wire up and down, lowness noise, more stabilization, save electricity, it can weld wire mesh which is f0.7-1.70, mesh is 1/4ˊ-1/2ˊ |
| |
| AH-J-W4 |
Characteristic: It can give wire up and down, lowness noise, more stabilization, save electricity, it can weld wire mesh which diameter is 0.45,mesh is 1/4´-1/2´
wire comb binding machine, wire crimping machine, wire processing machine |
| |
 |
 |
| AH-J-W4 |
AH-J-W6 |
 |
 |
| AH-L-W4 |
AH-L-W6 |
|
| |
| (model) |
mesh (mm) |
width (mm) |
diameter (mm) |
length each roll (mm) |
(mesh/minute) |
(mesh/minute) |
size of exterior (mm) |
| AH-L-W4 |
12.7-101.6(1/2ˊ-4ˊ) |
914.4-1219.2(12ˊ-48ˊ) |
Dia.0.63-Dia.2(BWG23-BWG14) |
120(400ˊ) |
65(radia) |
380/220V 50-60HZ |
2600*1700*1350 |
| AH-L-W6 |
25.4-152.4(1ˊ-6ˊ) |
1219.2,1524,1828.8(12ˊ-48ˊ) |
Dia.0.63-Dia.2(BWG23-BWG14) |
91.4m(300ˊ) |
45(radia) |
380/220V 50-60HZ 50KVA*6 |
3350*1800*1400 |
| AH-J-W6 |
6.35-12.7(1/4ˊ-1/2ˊ) |
1219.2-1828.8(48ˊ-60ˊ) |
Dia.0.74-Dia.1.07(BWG22-BWG19) |
120m(400ˊ) |
48(radia) |
380/220V 50-60HZ 50KVA*6 |
3050*1900*1750 |
| AH-J-W6 |
6.35-12.7(1/4ˊ-1/2ˊ) |
914.4-1219.2(12ˊ-48ˊ) |
Dia.0.45-Dia.1.07(BWG25-BWG19) |
120m(400ˊ) |
75(radia) |
380/220V 50-60HZ 50KVA*4 |
2350*1820*1700 |
|
|
|
|
