| |
| Automatism welded machine of steel wire mesh |
| |
| It has logicai configuration and easy operation reliable capability the sheer is very smootb, mesh is equality, exactitu and no burning mark .The error of diagonal line is small. The wire of longitude and woof are all of tolled wire ,they are can be straighten automaticly. It has exactly orientation set, the mesh sheet needn’t cut the eage is neat. |
| |
| The equipment of drawing wire mesh, welding net machines, fishing net machines, electric welding net machines is adopt engine drawing set. It made all of the mesh of sheet is equality and consistent. |
| The chrome copper alloy of fluctuation electrode is wear well. |
| |
The transformer power of connecting equipment is 80KW,The farest distance between transfomer and weld in turn. The control system adopt the adopt advanced digital integrated circuit control system of domestic, the crysral thyratron use the TM130 model of Japan Mitsubishi Corporation , The control precision is high it make sure tbe.
welding net machines, fishing net machines, electric welding net machines |
| |
|
| |
| Diameter |
1.8-3.0mm |
Rating voltage |
AC380v |
| width |
1.5m |
frequency |
50HZ |
| mesh |
50 mm *50 mm
150 mm *150 mm
can be changed |
Power supply |
Three-phase electricity and four lines |
| Thesection area oflead |
50 mm2 copper wire |
|
| |
The current of welding can be chaged , it can weld different dianmeter wire. The welding speed can be changed also according to the need.
The sheet that this n\machine can weld is 1.5M width arbitraly iength
USER can cut the wire mesh according to owners need.
Cut tools(AC220V,electrica scissors),workers cut thesheet well during thewelding.
The course need about 2-3 persons.
Use:1,construction mesb(floor heating mesh, wallboaud mesh,shuLE mesh)2,breed mesh. |
| welding net machines, fishing net machines, electric welding net machines |
| parameter: |
| |
| Diameter |
1.8-3.0mm |
Rating voltage |
AC380v |
| Welding extent |
1.5mm |
frequency |
50-60HZ |
| mesh |
50 mm *50 mm
150 mm *150 mm
can be changed |
Power supply |
Three-phase electricity and
four lines |
| Degree of weld |
40/Min |
The section area
of lead |
50mm2copper
wire |
| handle |
2-3 persons |
size |
|
| Themostwelding joint |
31 |
The weight of machine |
|
|
| |
| Accessories of machine: |
| |
1,twist shelf 30 spools
2,repair mesh machine I set
3,workbench I set(user can be made by Self in order to transit convenient).
4,electric scissors I piece |
| |
|
| |
The details should be offer to the foreign user |
| |
| Electrical source |
|
Powerofelectronic |
|
| Voltage |
|
|
|
| The power of outer connect transformer |
|
|
|
| The distance betwwen machine and transformer |
|
|
|
|
| |
| Our company can offer the relevant equipment according to the data that cuatomer offer. |
|
